ejotherm® NTK U

Applicazioni

Universal hammer-in anchor

• For concrete, solid and perforated masonry (A, B, C)
• For all insulation boards
• With European Technical Approval (ETA)

• Caratteristiche

  • Approved for concrete, solid and perforated masonry
  • Upon installation, the washer face de-couples from the sleeve, ensuring a flush finish with the insulation surface
  • Safe and smooth installation with built-in setting control through the EJOT telescope effect
  • Zero thermal transmission
  • Minimised risk of breaking nails due to fibre-reinforced composites
  • Premounted expansion nail for quick installation

• Dati tecnici

  • Anchor diameter: 8 mm
  • Washer diameter: 60 mm
  • Drill hole depth h₁ ≥: 50 mm 
  • Embedment depth h_ef≥: 40 mm
  • Point thermal transmission χ: 0.000 W/K 
  • Use categories ETA: A, B, C
  • German DIBt approval: Z-21.2-1844
  • European Technical Approval: ETA-07/0026

  Characteristic loads:
  
  

  Building material class A:

  • Normal weight concrete C 12/15 acc. to EN 206-1: 0.6 kN
  • Normal weight concrete C 16/20 - C 50/60 acc. to EN 206-1: 0.9 kN

  Building material class B:

  • Clay bricks (Mz) acc. to DIN 105: 0.9 kN
  • Solid lame sandstone (KS) acc. to DIN EN 106: 0.9 kN

  Building material class C:

  • Vertically perforated clay bricks (Hlz) acc. to DIN 105: 0.6 kN
  • Sand-lime perforated bricks (KSL) acc. to DIN EN 106: 0.9 kN

  *For calculation of design loads the national safety factors have to be included (e.g. Germany: 3). Please observe the approval.